Call Forwarding and Call Waiting Codes Explained: A Simple Cheat Sheet

Understand the standard GSM codes for call forwarding and call waiting, what each one does, and how Roshan users can activate or cancel them from the keypad.

Call Forwarding and Call Waiting Codes Explained: A Simple Cheat Sheet

Menus change from phone to phone, but keypad codes work almost everywhere. If you understand how these short codes are built, you can manage forwarding and call waiting on any handset, even a basic feature phone.

The codes below are the standard GSM supplementary service codes used by most mobile networks worldwide. Roshan's own guide, how to set up call forwarding, call waiting and missed call alerts, points to the current working shortcuts, so always confirm there before relying on a code.

How the codes are built

Every code follows the same pattern, which makes them easy to remember:

  • ** = register and activate (with a number)
  • * = activate
  • # = deactivate
  • *# = check status
  • = = erase completely

The number in the middle identifies the service: 21 is forward all, 67 is forward when busy, 61 is forward when unanswered, 62 is forward when unreachable and 43 is call waiting.

Standard call forwarding codes

Action Standard GSM code
Forward all calls **21*number#
Forward when busy **67*number#
Forward when unanswered **61*number#
Forward when unreachable **62*number#
Check forward-all status *#21#
Cancel forward all =21#
Cancel all forwarding at once =002#

Standard call waiting codes

Action Standard GSM code
Turn on call waiting *43#
Turn off call waiting #43#
Check call waiting status *#43#
Important: these are international GSM standards, not a Roshan-specific list. Networks can change or restrict codes. For the latest confirmed shortcuts, see the Roshan call management page and its linked USSD and My Roshan app guide.

How to dial a code correctly

  1. Open your phone's dialer.
  2. Type the code exactly, replacing "number" with the full destination number.
  3. Press the call button.
  4. Wait for the confirmation message on screen.

The one code everyone should remember

If your phone suddenly stops ringing and you suspect forwarding is on, =002# clears every type of forwarding in one go. It is the quickest "reset" for call diversion problems.

Frequently asked questions

Do these codes cost anything?

Dialing the code is normally free. Forwarded calls themselves may be charged as outgoing calls.

Why did I get "Connection problem or invalid MMI code"?

Check the code for typos, make sure you have signal, and confirm the code is supported on your network.

Do codes work on iPhone?

Yes. iPhone accepts standard GSM codes from the Phone keypad.